http://www.silverguard.com/c-9-3m-anti-tarnish-strips.aspx

 

thanks for the link.Any other ideas?

 

Hi Soundlover,

is your flute .925 silver or higher, or is it just silver plated?

This is the most important distinction: if your flute is just silver plated, you probably don't wish to use a silver polishing cloth or silver liquid, which will attack the silver layer, and strip it back (i.e. reduce it from its oxidised Ag+ state). You can use silver polishing cloths with solid silver bodies, however you need to check whether your keywork is also solid silver, or just plated.

For plated silver, you can use a silver plated lacquer cloth. Selmer make them specifically for silver plated flutes (like student ones).

Isopropyl Alcohol won't harm your flute, however it won't stop the black-greying of the silver which is normal after time. To revert it back to its original condition, it really does depend on whether you have enough silver in your flute to use a proper silver polish.

If it is a Pearl student flute, you will probably move on to a better intermediate one

 

Hi Head case and thanks for the answer.

It is a student flute,silver plated.I don't know what a lacquer cloth is but I'll check it.So there is nothing to do to stop the black-greying effect on a silver plated flute which is normal after time.
I guess intermediate flutes are good for intermediate students.I play only for five months.

 

Hi there,

Yes - then you will have to avoid all silver polishes. These will strip the silver plating off your flute back to the base metal.

The material of your flute is not actually as important: silver flutes are highly overrated imho. The wooden Boehm flute has a much more pleasing resonance and coloration without the shrill metallic edge of silver flutes (but they can be quite expensive).

Here's one type of safe silver plated lacquer cloth:http://www.justflutes.com/denis-wick-lacquer-polishing-cloth-product18876.html

With your silver plated flute, you will need to swab out moisture, and use alcohol to clear the finger based acid residues, to stop the oxidisation. After a thorough clean, you can try a safe silver plating solution to restore it:

http://cgi.ebay.co.uk/ws/eBayISAPI....SAPI.dll?ViewItem&rd=1&item=360404803687&ssPageName=STRK:MEAFB:IT#ht_1989wt_978

This one is safe, however you need to prepare the flute correctly before using it.

It's unlikely you will stay with your intermediate flute - open holes; a different embouchure to suit your playing style; off-set Gs all make the ergonomics more efficient.

In any case, a secondhand .925 silver flute or higher (.935) can be a great buy - if you give up during the recession, the silver content might hold its value lol (not!!)

 

thanks for the information.My flute is more than ok for the next couple of years,after and if I become a real flutist I will look for an upgrade..

 

I've heard that you can upgrade by getting a solid silver head-joint/mouthpiece. That's where the sound comes from.

 

Yes DEFINITELY get a mouthpiece. Way more sound when you use one of those. . . get it?

 

Lawl "flute maintenance"... That is all.

 

'Flute maintenance'? What kind of forum is thi--...oh,...flute maintenance, I get it. Carry on...

 

Quiet you two ...! Mine is bigger than yours!

Soundlover - good luck with resisting an upgrade for a couple of years lol.

 

Is that a contrabass flute, or a sub-contrabass flute?

 

It's just a small contrabass *modesty* lol.

Contrabasses are notable because a melody is still detectable. I'm not sure what the purpose of a subcontrabass is, other than bragging rights. Here's one played by a very experienced player.

It lends itself well to beat boxing.

I'm just not impressed by it: once all you can work out is a bovine like noise bellowing in different pitches no?

The subcontrabass is way less musical than the contrabass. But the longest flute (with a straight head) which can be played, is usually the alto flute. Bass flutes with U bend heads are easy, as are alto flutes with U bends and the bass flute has a glorious non-irritating drone about it. My alto flute is a metre long due to its extended footjoint. It gets really heavy just holding it horizontal. Its pitch favours mellow sultry music - like jazz and minor 3am music. It is just so creamy smooth for pitch. Well, the weight ...that's why the contrabasses and subcontrabasses are all of a vertical design. That sadly kind of loses the appeal of the flute for me. A flute has to be a flauto traverso and not vertical, otherwise it's just played in the same direction as a fipple recorder.

 

forgot the link: demo of a subcontrabass. Very expensive ....especially if you consider this is the kind of 'music' it produces:

 

Don't forget to clean between the keys from time to time.
I use a coton bud, it works quite well